Start with the connection
Send a part number or a brief description of the connection. Add a port-to-port list when available.
We can coordinate cables, optics, adapters and supporting parts across suppliers.
Identify the cable architecture
Passive DACs carry copper signals without active conditioning. Retimed AECs regenerate signals; linear active copper uses amplifiers.
AOCs integrate optical transceivers and fiber in one cable assembly. Match the proposed part to the equipment configuration.
Keep AEC and ACC requirements distinct. Ask the supplier to identify the architecture when product naming differs.
Connection details
Use the details you have. We can clarify missing items during sourcing.
| Area | Useful details |
|---|---|
| Endpoints and settings | Source and destination devices and ports; switch variant; adapter or DPU part number; protocol and link speed. Add known host coding, firmware, software, FEC, auto-negotiation and link-training settings. |
| Path and breakout | Copper, active cable or optical path; connector types; each breakout destination, branch length and lane mapping. For fiber links, include the required polarity. Keep new links and replacement links separate when their constraints differ. |
| Route and installation | Measured cable-management route, service slack and installation location. Compare length reference points, connector dimensions, cable diameter and bend limits. For active assemblies, ask for power per end and temperature limits. |
| Supporting parts and checks | Patch cords, trunks, panels, adapters, brackets, labels and spare quantities. Agree on port settings, installation checks, error monitoring and any required load or test scenario with your engineer. |
Compare supplier quotes
Ask for the proposed manufacturer part number, revision and datasheet. Keep quantities, alternatives and delivery priorities with each quote.