Technical resource

What to include in a server memory RFQ when the original DIMM is short or obsolete

When a server DIMM is short or obsolete, an RFQ still needs the installed part number, module type, platform, and which fields may change. This is a checklist, not a stock list.

When the DIMM you planned to order is short, obsolete, or no longer being built in the same revision, a vague request such as “32GB DDR5” is rarely enough to compare quotes. The useful starting point is still the installed or required part number, plus the fields that must stay exact if a substitute is even worth considering.

This page is a request-for-quote checklist for server memory. It does not list inventory, prices, lead times, or warranties, and it does not certify that one module can replace another.

Start with the part number on the module

Photograph the module label, or copy the part number from the server’s parts list, service tag record, or previous purchase order.

Include:

  • The complete manufacturer part number, not a shortened marketing name.
  • Any revision, BOM, date code, or country-of-origin mark that appears on the same label.
  • The manufacturer’s brand line if it is printed (for example, a Server Premier marking), because the same density can exist in more than one product family.

If you only have a platform-qualified option number (Dell, HPE, Lenovo, and similar), send that as well, and say whether you must stay on that branded option or can consider the equivalent generic part number. Do not assume those two numbers are interchangeable without checking the platform record.

Record the module, not just the capacity

Capacity alone does not describe a server DIMM. On the label, in the system inventory, or from the manufacturer’s public datasheet for that exact part number, record:

  • Capacity and speed (for example, 32GB, DDR5-5600).
  • Module type: ECC RDIMM, ECC LRDIMM, ECC unbuffered DIMM, or another type actually used in that system. These are not the same product class.
  • Rank, organization, and voltage.
  • Module height, if the chassis or air duct is tight.
  • ECC type as stated on the official document for that part (for example, x72 ECC on an unbuffered ECC DIMM).
  • DRAM manufacturer and die revision, if the label or official table shows them.
  • Any lock or component-control marking the manufacturer publishes for that part number.

If a field is not on the label, say that it is unknown rather than guessing.

Identify the server or motherboard

A module that matches capacity and speed can still be the wrong type for a board, or the wrong population for the number of channels already filled.

Include:

  • The server or motherboard model, and the BIOS or firmware level if you already know it.
  • How many sockets or channels are populated, and whether the new modules will be mixed with modules that remain in the system.
  • Any written platform qualification you are trying to keep, or a clear statement that you do not have one.

Say which fields may change

If the original part is short or being discontinued, say whether a substitute is acceptable, and which fields must stay exact.

Typical fields that often have to stay the same unless the platform documentation says otherwise: module type (RDIMM versus unbuffered ECC, for example), capacity per module, rank, voltage, and height. Fields that sometimes change between a last-time-buy part and a manufacturer-listed replacement include DRAM vendor, die revision, lock type, and SPD contents. Those differences are why a listed replacement still needs qualification on the target system. A close description is not a drop-in approval.

A current example: a Kingston phase-out notice

This example is taken from Kingston’s official documents. It is not a statement that YOUSHI has either part in stock, and it is not a claim that the replacement is a certified substitute in every system.

On 24 September 2026, Kingston published PCN_KSM56E46BD8KM-32HA_P for KSM56E46BD8KM-32HA, a 32GB DDR5-5600 ECC unbuffered DIMM (CL46, 2Rx8, 1.1V, Hynix A, Server Premier). The change type is “Phase Out for End of Life,” because of DRAM die revision end of life. The notice lists a replacement part, KSM56E46BD8-32MH, described as the same capacity, speed, module type, CAS latency, rank, and voltage, but with Micron H DRAM. The phase-out notice date is 24 September 2026. The target discontinue date is 22 December 2026, and Kingston states that an increase in demand may pull that date in.

Kingston’s public DDR5-5600 ECC unbuffered DIMM table, opened on 17 November 2026, lists KSM56E46BD8KM-32HA as Full Lock and KSM56E46BD8-32MH as DRAM Lock. The official PCN index for this part still shows three notices: New Part (12 June 2023), Change Notice (22 April 2026), and Phase Out (24 September 2026). No later official notice was listed on that index on 17 November 2026.

What this means for an RFQ is practical, not promotional:

  • Copy the installed part number and, if visible, its revision or BOM, before the label is lost.
  • If you are willing to consider the manufacturer-listed replacement, say so, and ask the supplier to quote it as a separate line, not as if it were the same SKU.
  • Confirm die revision, lock type, and platform qualification on the server you actually have. Do not treat “designed as a replacement” as already-certified drop-in use.
  • If you must keep the original part number, say that substitutes are not accepted, and include the quantity and the date by which you need an answer.

Quantity, condition, and timing — as questions, not promises

Also state, as your requirements rather than as assumptions about any one supplier:

  • Quantity, including spares if you need them.
  • Required condition (for example, new factory sealed, or another condition you will actually accept). If you can accept more than one condition, list them in order.
  • The warranty or documentation you expect to see in a quote, without treating any supplier’s policy as already agreed.
  • The delivery location and the window in which the parts are useful. A date is more useful than “ASAP.”

Availability, price, condition, and warranty belong in the quotation that answers this RFQ. They should not be inferred from a product page or from a manufacturer’s discontinue date.

What to send

A complete memory RFQ usually includes:

  • The installed or required part number, with revision if shown.
  • Capacity, speed, module type, rank, voltage, height, and ECC type.
  • DRAM vendor, die revision, and lock type, if known.
  • Server or motherboard model, and how the sockets are populated.
  • Whether substitutes are acceptable, and which fields must stay exact.
  • Quantity, required condition, warranty expectation, and delivery window.
  • Label photographs, or a note that the label is unreadable and that only the system record is available.

You can send that list from Request a Quote or Contact, or start from the server memory or ECC memory collection pages, or from the replacement-parts guide. If you already have a parts list, send the list; you do not need to invent a product page for every line.

Sources and update date

Page drafted 17 November 2026. Facts cited above were checked on that date. This page will be updated if those official documents change. It is not a stock list, a price list, or a certification of interchangeability.

If you need to compare offers that are labelled new, pull or tested, see Questions to ask about new, pull, and tested server memory before you request a quote. That page is a list of buyer questions; it does not state a YOUSHI condition or warranty policy.

If the same request also includes SSD or boot-drive lines, see Building a small mixed BOM for a memory and SSD upgrade.

Quote list

Request a Quote
Request a Quote