When an enterprise SATA or SAS SSD has to be replaced, capacity is only one field in the request. Two drives can have the same advertised capacity and still differ in host interface, form factor, endurance, firmware, carrier, and how they are installed in a hot-swap bay. This page is a checklist for sending a sourcing enquiry. It is not a stock list, a price list, or a firmware policy. YOUSHI coordinates supplier quotations for specified server and storage parts from China.
Start with the installed or required part number
Record the exact manufacturer or OEM part number from the label, including any suffix or revision mark. If the label is damaged or only a system record is available, say so and send a photo of the label anyway. A capacity-only description such as “1.92TB enterprise SSD” is not enough to compare quotes, because several interfaces and endurance grades exist at that capacity.
If you already have a current ordering part, use that. Existing examples on this site include the FORESEE UNCIA 3856 2.5-inch SATA III rows listed under Enterprise SATA/SAS SSD. Those pages are manufacturer-listed configurations, not a statement that any of the drives is in stock.
Treat SATA and SAS as different interfaces
A 2.5-inch bay does not make SATA and SAS interchangeable. The server or storage backplane, the RAID or HBA controller, the cabling, and the drive’s host interface have to be identified together. A replacement request should say whether the installed drive is SATA or SAS, and which controller or backplane it sits on.
The official Longsys product table for the FORESEE UNCIA 3856 series, opened on 18 November 2026, lists the published RSYE3856 part numbers as SATA III in a 2.5-inch enclosure. Those rows are SATA examples only. They do not describe a SAS drive, and they should not be used as a SAS substitute. If you need a SAS SSD, state the SAS part number, the controller, and the backplane; do not send a SATA part number and assume the interface can be changed.
Form factor, thickness, carrier and hot-swap
Note the form factor, the drive thickness, and whether a carrier, caddy, or tray is required with the drive or already stays in the chassis. A nominal “2.5-inch” label does not establish fit. The official UNCIA 3856 table lists a size of 100.20 × 69.85 × 6.80 mm for the published rows; that dimension still has to be checked against the bay, connector position and carrier. Say whether the drive is hot-swapped in a live system, and whether the replacement must arrive already mounted in a specific OEM tray.
Endurance is a different part, not a field on the same drive
Write endurance is usually stated as drive writes per day (DWPD) or terabytes written (TBW) for a stated term. Two part numbers can share a capacity and still have different endurance grades. On the same official UNCIA 3856 table, the N-suffix rows (for example RSYE3856N-1920) list 1 DWPD, and the T-suffix rows (for example RSYE3856T-1920 and RSYE3856T-480G) list 3 DWPD. Those are different published configurations. Do not combine the capacity of one row with the endurance or IOPS of another.
If you do not have a part number, describe the workload you expect (for example mostly read, or frequent writes) and any DWPD or TBW figure from the installed drive or the original bill of materials. Published manufacturer speeds and IOPS are listed figures, not a guarantee in every host or queue depth. Ask the supplier to confirm the exact SKU, and treat the official table as a starting point.
Firmware, revision and platform qualification
Enterprise SSDs are often qualified on a specific server, storage array, or OEM firmware family. A visually similar drive can still fail to enumerate, stay in an unsupported state, or lack a required security or management feature if the firmware does not match the platform. This page does not state a YOUSHI firmware policy, and it does not claim that a manufacturer-branded drive is already qualified on your host.
If the label or system record shows a firmware version, an OEM rebrand, a security/FIPS option, or a “qualified for” server model, include that in the request. If you do not know the firmware, say so and include a label photo and the server or backplane model. State whether the host must keep a specific firmware, or whether a later manufacturer revision may be considered after you review it.
Condition, evidence and what not to assume
State the required condition as a preference — for example new, unused pull, or tested used — and what evidence you want to see, such as packaging, remaining-life data, or a test log. Do not assume that “enterprise” or a matching capacity means the drive is new, has the same remaining life, or can be mixed in the same array. YOUSHI will not invent stock, lead time, warranty, or interchange on the basis of a family page.
The manufacturer’s published warranty period, where one is listed on an official table, is the manufacturer’s figure. It is not a warranty commitment by YOUSHI.
What to send with the request
- Exact part number, including suffix and any revision mark, or a note that only a capacity or a system record is available.
- A readable label photo, and a photo of the drive in its carrier if the tray matters.
- Host interface (SATA or SAS), and the server, storage system, RAID/HBA and backplane model if known.
- Form factor, thickness, and whether a specific carrier or hot-swap tray must be included.
- Capacity, endurance grade (DWPD or TBW) or workload description, and any firmware or OEM qualification requirement.
- Quantity, required condition, and any delivery window — as a requirement, not as a promise that stock exists.
- Whether a substitute may be offered, and which fields must stay exact (interface, firmware family, endurance, dimensions, or security options).
You can send that list from Request a Quote or Contact. If the request is only for a SATA or SAS SSD family, start from the Enterprise SATA/SAS SSD collection. Other published FORESEE UNCIA 3856 examples on this site include RSYE3856N-480G, RSYE3856N-960G, RSYE3856N-3840, and RSYE3856T-960G. If you already have a mixed parts list, send the list; you do not need a product page for every line.
Sources and update date
- Longsys, UNCIA 3856 Series Enterprise SATA SSD product table, opened 18 November 2026: https://www.longsys.com/products/solid-state-drive/enterprise-ssd/unica-3856-series-enterprise-sata-ssd.html
Page drafted 18 November 2026. The official table cited above was checked on that date. This page will be updated if that manufacturer listing changes. It is not a stock list, a price list, or a certification that any two drives are interchangeable.
If the SSD is part of a small memory-and-drive upgrade kit, see Building a small mixed BOM for a memory and SSD upgrade.