A server-memory quote is only useful if both sides mean the same thing by “new,” “pull,” or “tested.” Those words are used loosely in the market. They are not a substitute for a part number, and they are not a warranty. This page lists questions a buyer can ask before sending an enquiry, so the offer you compare later is the offer you thought you requested.
YOUSHI coordinates supplier quotations for specified server memory from China. This article does not state a YOUSHI condition policy, return policy, or warranty. Those terms, if any, have to be confirmed on the specific offer you are sent. It is also not a stock list, a price list, or a claim that any two modules are interchangeable.
Start with the part number and the platform
Ask for the exact manufacturer or OEM part number, including any suffix, revision, or date-code format you can read on the label. If you are replacing an installed DIMM, send a clear photo of the label even when the part number looks complete. If the original module is short or obsolete, use the checklist in What to include in a server memory RFQ when the original DIMM is short or obsolete as well — condition questions do not replace identification questions.
Name the server, motherboard, or approved memory population rule if you have it. A module can be the right density and still be the wrong rank, speed, voltage, or register type for that platform. Existing named examples on this site, such as Kingston KSM56E46BD8KM-32HA and the FORESEE rows listed under Server Memory and ECC Memory, show how a part number and module type are recorded. Those pages are not a statement that any module is in stock.
Ask what the supplier means by new, pull, and tested
Do not treat these labels as industry-standard grades. Ask the supplier to define the term they are using for the specific lot they intend to quote:
- New. Does “new” mean factory-sealed original manufacturer packaging, new pull-from-distribution stock in the manufacturer tray or bag, or simply unused? Has the seal been opened? Are original manufacturer labels present and complete?
- Pull. Pulled from what equipment, and why was it removed? Was it a working pull, a cosmetic pull, or an untested removal? Is there any record of the previous host, uptime, or reason for decommission?
- Tested. Tested how, by whom, and against what result? A power-on, an SPD read, a vendor tester pass, or a timed memory test are not the same thing. Ask for the test name, duration, temperature if relevant, and whether the result will be supplied with the shipment.
If a supplier uses other words — refurbished, recertified, pulled-tested, or “equivalent grade” — ask them to translate those words into the same facts: origin, packaging, cosmetic state, and test scope. Do not assume that a familiar word carries a familiar policy.
Packaging, date codes, and mixed lots
Ask whether the quotation is for a single lot or a mix. For a matched set, ask whether all modules will share the same part number, rank, organization, and speed, and whether date codes or firmware/SPD revisions will be kept in a stated range. If date codes may vary, ask the supplier to say so in the quote rather than discovering a mixed kit at receiving.
Ask how the modules will be packed for transit — original manufacturer packaging, anti-static trays, or bulk bags — and whether you will receive the same packaging that was used to inspect them. Packaging is not proof of condition, but it is part of how you will check the delivery against the quote.
What a useful “tested” answer includes
If you need tested modules, ask the supplier to state, in writing:
- Whether every module in the quantity is tested, or only a sample.
- Which test is performed, on what equipment, and for how long.
- Whether the test is a simple presence or SPD check, or a pattern test of the DRAM.
- What happens if a module fails your incoming check — including whether that handling is part of the offer.
A “tested” label without that scope is not enough to compare two quotes. YOUSHI will not invent a test report or a pass criterion on this page. If you have a required incoming test, include it in the enquiry so a supplier can say whether they can meet it.
Label, SPD, and module-type checks
Ask whether the quoted part number will match the label and the SPD data. If a label looks amended, incomplete, or inconsistent with the module type you need, ask for photos of both sides of a representative module before you accept the offer.
Confirm the module type you actually need: UDIMM, RDIMM or LRDIMM; ECC or non-ECC; rank and organization; speed and the speed you will run in the host; voltage; and height or heat-spreader constraints if the chassis is tight. If a field may vary, say which fields must stay exact and which, if any, you will review as a proposed alternative. Do not treat a visually similar module as the same part.
Warranty and returns belong to the specific offer
Manufacturer warranty statements on a vendor website, and informal comments about “seller warranty,” are not a YOUSHI warranty and are not automatically part of a quotation. If warranty, DOA handling, or a return window matters to the purchase, ask for those terms on the offer you are comparing. If the answer is “none,” that is still a useful answer: you can decide whether the rest of the offer is acceptable.
This is also why condition and warranty should not be copied from a previous order. A later lot may be a different grade even when the part number is the same.
What to send with the enquiry
A complete starting request usually includes:
- The exact part number, plus a label photo if you are matching an installed module.
- Quantity, and whether the modules must be a matched set.
- Server or motherboard model, and any approved-vendor or population rule you must follow.
- The condition you want to request (for example new, pull, or tested), and the questions above that matter for that condition.
- Any test, packaging, date-code, or document requirement you will use at receiving.
- Whether a substitute may be offered, and which fields must remain exact.
Send that from Request a Quote or Contact. You do not need a product page for every line of a mixed list; paste or attach the list. Related replacement and upgrade notes are also in Replacement Parts & Planned Spares and Server Upgrade Guide.
Sources and update date
This page is a buyer checklist for condition language in a memory RFQ. It does not cite a manufacturer condition policy, and it does not add a YOUSHI condition or warranty policy. Page drafted 18 November 2026. It will be revised if a later, separately published identification or RFQ guide on this site needs a cross-reference. It is not a stock list, a price list, or a certification of interchange.
When those condition questions sit inside a short mixed memory-and-SSD bill of materials, see Building a small mixed BOM for a memory and SSD upgrade.